User's Manual

30 P100i User’s Manual 980590-001 Rev. A Draft 1

P100i Printer Setup

Printing a Test Card

With Ribbon Cartridge and Card Cleaning Cartridge loaded, your P100i printer is ready to

print. To check the operation of the printer, you should print a test card.

1. Place the printer power switch in the OFF (0) position.

2. While holding down the Multi Function Button, place the printer power switch in the

ON ( | ) position. The LCD status window will glow blue.

3. Keep pressing the Multi Function button until you are prompted to insert a card.

4. Insert a card into the card entry slot. At this point you can release the Multi Function

button. A test card will print after a few seconds and then exit the printer.

P520CEM

Serial N¡ 060376

Firmware: V1.50

Head resistance: 1568

Offset: X002 - Y015

EC: 0014

Printing Counter: 00002716

Multi-

Function

Switch

Power

Switch