User's Manual

P100i Printer Setup
Inserting Cards
980590-001 Rev. A Draft 1 P100i User’s Manual 29
Inserting Cards
Cards are inserted one at a time into the slot on the front of the P100i. The card is printed (on
the top surface), and ejected out through the same slot.
The following figure shows the usual insertion orientation for contact smart-cards and cards
with a magnetic stripe. (Note that for magnetic-stripe cards, if printing is desired on the side
with the magnetic stripe, the card would be inserted stripe up, with the stripe toward the right
side of the printer as viewed from the front.)
Important • Handle the cards only by the edges.