User's Manual

8 MPM-100
Charging the MPM-100
Using Cradle
Place the MPM-100 into a slot in the cradle. Ensure that the MPM-100 is seated properly. Failure to do so
can cause the MPM-100 to not charge properly. The MPM-100 Power LED indicates that the MPM-100 is
charging.
Using USB Cable or Power Supply
To charge the MPM-100 using a USB cable:
1. Connect the micro USB A connector of the USB cable to the USB port on the MPM-100.
2. Connect other end of the USB cable to a host computer or to the power supply.
QRG.fm Page 8 Friday, October 14, 2011 3:24 PM
PRELIMINARY