User's Manual

Quick Reference Guide 11
Smart Card Transactions
Launch a transaction application on the mobile device and initiate a credit or
debit transaction.
Hand the MPM-100 to the customer. The customer inserts the Smart card into
the slot, orienting the card with the contacts facing down and toward the back of
the MPM-100.
For credit transaction the customer may need to sign on the mobile device
screen. For debit transactions, the customer enters a PIN on the MPM-100
keypad following the instructions on the display. Follow the screen prompt for
when to remove the Smart card from the MPM-100.
Contactless Transactions
Launch a transaction application on the mobile device.
Customer places the Contactless card against the
Contactless area on the MPM-100. The card must be at
most 1 cm from the surface of the MPM-100.
The Contactless Notification LEDs light green from left to
right. When all LEDs are lit green, the customer can remove
the card away from the MPM-100.
If required, the customer enters their PIN following the
instructions on the display.
NOTE Credit and debit transactions will not function without an encryption key injected or if a
tamper event occurs.
NOTE Contactless transactions will not function without an encryption
key injected or if a tamper event occurs.
QRG.fm Page 11 Friday, October 14, 2011 3:24 PM
PRELIMINARY