User's Manual

Beacon Hardware Specifications and Installation 2 - 7

There is one style of bracket mount included with the Indoor Style Beacon: Part number - MPACT-MB2000-01-WR.

Figure 2-7 Metal Beacon Wall Mount Bracket: MPACT-MB2000-01-WR

2. Activate one or more MPACT-MB2000-01-WR beacons by pulling the mylar strip out from inside the beacon housing.

Phillips head screw driver for mounting the bracket (metal brackets only) to a wall

Figure 2-8 Indoor Style Beacon - MPACT-MB2000-01-WR

2.3.2 Mounting and Installing a GE-MB2001-01-WR (TBD)

To mount a GE- MB2001-01-WR model beacon:

NOTE: Ensure the beacon is positioned correctly, Once the beacon is mounted on the

bracket it will be difficult to remove.

CAUTION: After pulling off the last mylar strip, you have 20 seconds to associate the

beacon in either offline or online mode using the Toolbox application.