User's Manual

2 - 6 MPact Location & Analytics Hardware Installation Guide
There is one styles of bracket mount included with the Indoor Style Beacon: Part number - MPACT-MB2000-01-WR.
Figure 2-6 Metal Beacon Wall Mount Bracket: MPACT-MB2000-01-WR
3. Fit the beacon’s housing into the bracket.
The barcode label should face up toward the ceiling and the smooth front of the beacon should face out toward the aisle
where the mobile client is expected to engage.
2.4 USB Beacon Part Number: MPACT-MB3000-01-WR
A USB powered interface is required to power the USB Beacon. No additional hardware is required.
2.4.1 Installing the USB Style Beacon
Figure 2-7 shows a USB style beacon.
To activate a beacon part number - MPACT-MB3000-01-WR:
1. Insert the beacon into any standard USB power source.
NOTE: Ensure the beacon in positioned correctly, because once the beacon is mounted on
the bracket it will be difficult to remove.
Mode Sleep Configuration Broadcast LED Behavior
0-2 seconds No action No action No action
2+ -5 Broadcast Broadcast Broadcast Slow flash when
button flashes 300
ms on / 300ms off.
5+ - 10 Move to
configuration
Remain in
configuration
Move to
configuration
Fast flash – 100ms
/on & off
+ 10 Sleep Sleep Sleep Solid light