User's Manual
Table Of Contents
- About this Guide
- MPact Bluetooth® Smart beacon Overview
- Beacon Hardware Specifications and Installation
- 2.1 RB Beacon Part Number: MPACT-T1B20-000-WR
- 2.2 RB Beacon Part Number: MPACT-T1B10-000-WR
- 2.3 2AA Beacon Part Number: MPACT-MB2000-01-WR
- 2.4 USB Beacon Part Number: MPACT-MB3000-01-WAR
- 2.5 Beacon Part Numbers: MPACT-MB4000-01-WR and MPACT-MB4001-01-WR
- 2.6 MPACT-MB4000-01-WR and MPACT-MB4001-01-WR Antenae Positions
- 2.7 Beacon Battery Replacement
- Customer Support
2 - 10 MPact Location & Analytics Hardware Installation Guide
2.5 Beacon Part Numbers: MPACT-MB4000-01-WR and MPACT-MB4001-01-WR
As a prerequisite, the following hardware items are required to mount a beacon to a surface.
• Beacon: Part numbers - MPACT-MB4000-01-WR and MPACT-MB4001-01-WR
• Two No. 6 gauge or M3.5 screws (not included) for use on the intended surface
• Phillips head screw driver compatible with No. 6 gauge screws for mounting the Outdoor Style beacon
2.6 MPACT-MB4000-01-WR and MPACT-MB4001-01-WR Antenae Positions
Following are the antenae positions of the MPACT-MB4000-01-WR and MPACT-MB4001-01 Outdoor Beacons:
• MPACT-MB4000-01-WR points down at a 20 degree angle
• MPACT-MB40001-01-WR points to the side at a 20 degree angle
Figure 2-10 shows the antenae positions of the Outdoor Beacon.
Figure 2-10 Antenae Positions of the MPACT-MB4000-01-WR and MPACT-MB4001-01-WR Beacons