User's Manual
Table Of Contents
- Product Introduction
- Infrastructure Device Installation
- Device Configuration
- License Information
- Customer Service
- Certification and Safety Information
- FCC Regulatory Information
- Safety Information for the MOTOMESH Products
- Safety Certification
- Regulatory Requirements and Legal Notices
- Regulatory Requirements for CEPT Member States (www.cept.org
- European Union Notification
- Equipment Disposal
- UK Notification
- Belgium Notification
- Luxembourg Notification
- Czech Republic Notification
- Norway Notification
- Greece Notification
- DECLARATION OF CONFORMITY
- EU Declaration of Conformity for RoHS Compliance
- CMM Labeling and Disclosure Table
- Software License Terms and Conditions
Chapter 3: Device Configuration
November 2007
3-8
16
Configure the 802.11a Membership VLAN by entering 0-4095 into the 802.11a Membership VLAN entry
field.
The minimum requirement for this field is 4095, which is the initial
designated Management VLAN.
If the NEW Device is to be a 2.4/4.9 Mesh, the 802.11a Membership
VLAN entry field will become disabled. This is will eliminate the possibility
of creating a network loop and VLAN overlap. Use the VLAN Configuration
Tool after the device(s) have been added using the Tools | VLAN
Configuration menu option.
Figure 3-11 Entering 802.11a Membership VLAN Data