User's Manual
Table Of Contents
- Product Introduction
- Infrastructure Device Installation
- Device Configuration
- License Information
- Customer Service
- Certification and Safety Information
- FCC Regulatory Information
- Safety Information for the MOTOMESH Products
- Safety Certification
- Regulatory Requirements and Legal Notices
- Regulatory Requirements for CEPT Member States (www.cept.org
- European Union Notification
- Equipment Disposal
- UK Notification
- Belgium Notification
- Luxembourg Notification
- Czech Republic Notification
- Norway Notification
- Greece Notification
- DECLARATION OF CONFORMITY
- EU Declaration of Conformity for RoHS Compliance
- CMM Labeling and Disclosure Table
- Software License Terms and Conditions
Chapter 3: Device Configuration
November 2007
3-2
Configuring a 4300 Device Mesh from 2.4 to 5.4, 5.8, or 4.9
The following procedure describes the steps required to configure and add the following device types
prior to field deployment using the MeshManager EMS:
- 2.4/5.XGHz Dual Radio configured from the factory (details in Step 7)
- 2.4GHz Single Radio only configuration (details in Step 8)
- 2.4/4.9GHz Dual Radio configured from the factory (details in Step 9)
- 2.4GHz Single Radio only configuration for which you now want to activate the 802.11a
radio using a License Key (details in Step 10)
Procedure 3-1 Configuring a MOTOMESH Duo 4300-XX Device Mesh
1
Ensure that all the 4300 devices are wire-connected to the MOTOMESH Duo 2.0 MiSC.
It is recommended that the 4300 devices are set-up on the bench prior to actual deployment in the field.
2
The MOTOMESH Duo 2.0 MeshManager element management application must be installed and running.
3
From within MeshManager select the
Add New MOTOMESH Duo Device icon from the Toolbar
menu, or select File |Add New MOTOMESH Duo Device from the application menu.