User's Manual
Table Of Contents
- Product Introduction
- Infrastructure Device Installation
- Device Configuration
- License Information
- Customer Service
- Certification and Safety Information
- FCC Regulatory Information
- Safety Information for the MOTOMESH Products
- Safety Certification
- Regulatory Requirements and Legal Notices
- Regulatory Requirements for CEPT Member States (www.cept.org
- European Union Notification
- Equipment Disposal
- UK Notification
- Belgium Notification
- Luxembourg Notification
- Czech Republic Notification
- Norway Notification
- Greece Notification
- DECLARATION OF CONFORMITY
- EU Declaration of Conformity for RoHS Compliance
- CMM Labeling and Disclosure Table
- Software License Terms and Conditions
MOTOMESH DUO 2.0 4300 Users Guide
November 2007
2-9
Procedure 2-2 Reset Plug Usage Information
BandPass Filter Usage Information
The BandPass filter should be used when running a MOTOMESH DUO device together with Canopy
while operating in the 5.8GHz range. The bandpass filter is supported for the 5.8GHz band only.
The BandPass filter attaches to the 5.8 antenna socket, positioned between the unit and the antenna.
Figure 2-9 BandPass Filter Example
Infrastructure Device Deployment and Installation
MOTOMESH devices require professional installation to ensure that the installation is performed in
accordance with Motorola installation standards. All common precautions for grounding and
electrostatic discharge protection should be observed during deployment and installation.
To eliminate risk of electric shock, DO NOT connect/disconnect cables while units are
energized.
Observe the following additional guidelines when deploying fixed Infrastructure devices:
• The MOTOMESH Duo 4300 device may be mounted on a pole having a diameter of 1-
3.5 inches, utilizing the provided brackets.
• The antenna must have a separation distance of at least 2 meters from the body of all
persons and must not be co-located or operating in conjunction with any other antenna
or transmitter.
• Users and installers must be provided with antenna installation and transmitter operating
conditions to satisfy RF exposure compliance.
• When deploying the MOTOMESH Duo 4300 device, the antenna(s) should be a
minimum of 30 inches from any nearby metal poles to avoid distortion of the RF pattern.
• The installation location must provide power to the MOTOMESH DUO 4300 Device.
1
Connect the Reset Plug to the Personality Port located on the “A” side of the 4300 device, same side as the
Power ON indicator light.
2
The Hardware Reset Plug must be inserted for more than 4 seconds, and then removed.