User's Manual

MOTOMESH DUO 2.0 4300 Users Guide
November 2007
2-7
Infrastructure Device Assembly
Figure 2-5 shows the external connection points for a MOTOMESH Duo 4300 device. The figure
below it shows some examples of optional personality plugs (Black – Canopy Connect PoE, and
Standards based 802.3 af PoE White). A red Hardware Reset Plug (not shown below) is also available
and is used to reset a 4300 device back to its factory default configuration.
Figure 2-5 Infrastructure Device Top View showing External Connection Points
Figure 2-6 External Personality Plugs (Black, White, Red, or none)
N-Type Antenna (5.8)
Power
Ethernet Por
t
N-Type Antenna (5.8)
Black plug for use
with the Canopy
Connect PoE option.
White plug for use with
the Standards based
802.3af PoE option.
NOTE: An optional Red Hardware Reset Plug (not shown
above) is used to reset a 4300 device back to its factory
default configuration. The Hardware Reset Plug must be
inserted for more than 4 seconds and then removed.
N-Type Antenna
(2.4)
Power ON
Indicator Light
Device Hinges
Ethernet Port or Optional PoE
port.
N-Type Antenna (4.9,
5.4, or 5.8)
An optional External
Personality Plug is
connected here
ONLY if the
Standards based
802.3af PoE or
Canopy PoE (option)
is purchased. If
neither PoE is
purchased, the port
will be covered.
Gore Vent
A
B