User's Manual

MOTOMESH DUO 2.0 4300 Users Guide
November 2007
2-3
Ports and Connections
The following list defines the standard ports and connections for the MOTOMESH Duo 4300 device
running in either the IAP or MWR modes.
• 100-240V A/C Power Cable with flying leads
• One non Power over Ethernet (PoE) Ethernet port
• One Power over Ethernet (PoE) capable port supporting:
o Canopy Connect PoE
o Standards based 802.3af PoE
IAPs can be pre-configured to use Canopy Connect PoE or 802.11 Standards
Based PoE or with POE Disabled.
• Optional External Personality Plug to activate power over Ethernet Motorola Canopy ™
PoE or standards based 802.3af PoE.
• Mounting Bracket
Operator Supply List
The Network Operator must supply the following equipment:
• Mounting Location
• Power Source (100-240 VAC depending on IAP configuration)
• Ethernet connection between the IAP and MiSC.
Optional Antennas
The following antennas are recommended for use with Infrastructure Devices.
Table 2-1 Recommended Antennas for Infrastructure Devices
Motorola Part Number Gain Usage
8571327H01
8 dBi 2.4GHz Infrastructure Antenna
8563328B02
6 dBi 2.4GHz Infrastructure Low Power Antenna
8563328B03
4 dBi 2.4GHz Infrastructure Low Profile Antenna
8571328H01
10 dBi 5.8GHz Infrastructure antenna
8563339B01
6 dBi 5.8GHz Low Power Infrastructure Antenna
RAN4044A
10 dBi 5.4GHz Infrastructure Antenna