User's Manual
Chapter 1: Product Introduction
May 2007
1-6
Table 1-3 MOTOMESH Duo 4300-54 Device Specifications
Radio Characteristics
Primary Radio Operating Freq. (GHz) 2.4 to 2.4835 (2nd ISM band)
Secondary Radio Operating Freq. (GHz) 5.49 to 5.71 (ETSI – Band B)
Wi-Fi Support 802.11b/g at 2.4GHz; 802.11a at 5.4GHz
RF Modulation CCK / OFDM
2.4 GHz Portion 5.4 GHz Portion
Output Power (Maximum) 35 dBm EIRP 30 dBm EIRP
Receive Sensitivity
801.11b: -92 dBm (at 11 Mbps)
to -100 dBm (at 1 Mbps)
801.11g: -70 dBm (at 54 Mbps)
to -95 dBm (at 6 Mbps)
802.11a: -70 dBm (at 54 Mbps) to -93
dBm (at 6 Mbps)
Power Control 1dB increments
Antenna Type
Two (2) omnidirectional, 8 dBi (for 2.4 GHz Radio) and 10 dBi (for 5.8
GHz Radio)
Antenna Connector N-Type
Routing
Routing Engine MeshConnex Layer 2 routing with Layer 1 situational-awareness
Routing Protocol
Patented, hybrid proactive/reactive routing (low latency & fast route
convergence)
IEEE 802.11s Support Upgradeable to final IEEE 802.11s standard via OTA software updates
Network
Network Management Software MeshManager Element Management System via secure SNMP v.3
Network Interface 10/100Mbps Ethernet (RJ-45) port with surge suppression
Network Segmentation
Multiple SSIDs with VLAN mapping
Quality of Service (QoS) 802.11e, EDCF, and IP precedence bits (ToS) supported via DSC
Security
Virtual LAN (VLAN) Supports up to sixteen (16) per node, or 4094 per network
Client Encryption Support WEP, WPA (TKIP) and WPA2 (AES, 802.11i)
Internodal Encryption Intra-Mesh Security
Authentication 802.1X (Infrastructure/Client) and MAC address hardware authentication
Power
Power Requirements 90-264 VAC (with variation at 47 to 63 Hz)
Power Connector AC power cord, 12 ft