User Manual

8
QL Series User Guide
Introduction to the QL and QL Plus Series
Thank you for choosing one of our Zebra
®
QL™ series Mobile
Printers. These rugged printers are sure to become pro-
ductive and efficient additions to your workplace thanks to
their innovative design. Because they are made by Zebra
Technologies, you’re assured of world-class support for all of
your bar code printers, software, and supplies.
• This user’s guide gives you the information you will need
to operate all QL series printers.
• The QL series uses the CPCL programming language.
To create and print labels using the CPCL language, re-
fer to the Mobile Printer Programming Guide and our
Label Vista™ label creation program which are both avail-
able on our Web site at www.zebra.com.
• The QL series offers optional interpreters for the EPL™ and
ZPL II
®
(up to Version 30.8.4) Programming Languages.
The printer must be equipped with the optional mem-
ory upgrade and an appropriate application in order to
use this function. QL Plus™ series printers have EPL and
ZPL II emulation as a standard feature.
Manuals for the ZPL II or EPL2 label design programming
languages are also available on our Web site .
Unpacking and Inspection
Inspect the printer for possible shipping damage:
• Check all exterior surfaces for damage.
• Open the media cover (refer to “Loading the Media” in
the Getting Ready to Print section) and inspect the media
compartment for damage.
In case shipping is required, save the carton and all packing
material.
Reporting Damage
If you discover shipping damage:
• Immediately notify and file a damage report with the ship-
ping company. Zebra Technologies Corporation is not re-
sponsible for any damage incurred during shipment of
the printer and will not cover the repair of this damage
under its warranty policy.
• Keep the carton and all packing material for inspection.
• Notify your authorized Zebra re-seller.