User Manual

50
QL Series User Guide
Kickstand
Refer to Figure 16 . The Kickstand option allows users to use
the printer on a desktop. To use the optional Kickstand: Flip
the Kickstand on the back of the printer open until you feel a
slight detent. The printer will now sit at approximately a 30º to
45° angle on a desktop depending on the printer model.
The retainer for the Kickstand has strain relief features which
can be used with the communications cable. Refer to the sec-
tion on Connecting the Printer.
Caution • Do not use the printer while charging a battery with the
LI72 charger.
Figure 16: Using the Kickstand