User Manual

49
QL Series User Guide
Using the Accessories
Belt Clip
Refer to Figure 15. All QL series printers are have a belt clip
installed as a standard feature. To use: hook the clip over
your belt, and ensure that the clip is securely attached to the
belt. The belt clip will pivot to allow you to move freely while
wearing the printer.
The retainer for the Belt Clip has a strain relief feature which
can be used with the communications cable. Refer to the sec-
tion on Connecting the Printer.
continued
Printer can
pivot freely
Figure 15: Using the Belt Clip
Clip printer to
belt