User's Manual

13
MZ Series User Guide
MZ Series Quad Docking Station
The MZ series Quad Docking Station is designed to dock
and charge up to four MZ series printers simultaneously.
1. Ensure that the Docking Station has been installed prop-
erly per its instruction manual. Ensure that the power
supply is properly connected and its power indicator light
is on.
2. Slide a printer into any one of the four docking bays as
shown in Figure 5. The printer’s charge status indicator
will turn amber if the printer is properly inserted and the
battery is less than 90% charged.
The printer’s charge indicators will allow you to monitor the
charging process. Refer to the Controls section of this manual
for more information.
Figure 5: MZ Series Quad Docking Station
Amber/Green (Charge)
Indicator
Green (Power)
Indicator
Slide Printer into docking bay