User's Manual
Table Of Contents
- Proprietary Statement
- Document Conventions
- Introduction to the RW Series
- Unpacking and Inspection
- Reporting Damage
- Getting Ready to Print
- Battery Safety
- Charger Safety
- Installing RW Series Batteries
- The LI72 Charger
- Charging Battery Packs with the LI72 Two-Wire Version
- Charging Battery Packs with the LI72 Three-Wire Version
- Model UCLI72-4 Quad Charger
- Loading the Media
- Loading Media Procedure
- Loading Media From An Internal Supply
- Loading Media From An External Supply
- Operator Controls
- Control Panel
- Programmable LCD Settings
- Verify the Printer Is Working
- Printing a Configuration Label
- Connecting the Printer
- Cable Communications
- Serial (RS232C) and USB Combination Port
- USB
- Wireless Communications
- Wireless Communications with Bluetooth®
- Bluetooth Networking Overview
- Wireless Local Area Network Overview
- Setting Up the Software
- Radio Regulatory Information
- Bluetooth RW -ZBR3 Radio (RW 220 and RW 420)
- European Regulatory Information for the RW-ZBR3 Bluetooth Radio
- Europe – EU Declaration of Conformity
- Zebra Bluetooth Radio 2.0 RW-ZBR4 (RW 220 and RW 420)
- European Regulatory Information for this Radio
- Europe – EU Declaration of Conformity
- Compact Flash (802.11b) Radio Module
- European Regulatory Information for this Radio
- Europe – EU Declaration of Conformity
- Zebra Value Radio, 802.11b
- European Regulatory Information for this Radio
- Europe – EU Declaration of Conformity
- WLAN Module Using 802.11b/g Radio
- European Regulatory Information for this Radio
- Europe – EU Declaration of Conformity
- Republic of China Regulatory Information for the Compact Flash 802.11b/g Radio
- Compact Flash (802.11b) and Bluetooth Co-located Radio Modules
- European Regulatory Information for the Compact Flash 802.11b Radio and Bluetooth Co-located Radio Modules
- Europe – EU Declaration of Conformity
- Card Reader Options
- Magnetic Stripe Reader
- Smart Card Reader
- Using the Accessories
- Belt Clip
- Adjustable Shoulder Strap
- Cradles
- RW 420 Vehicle Cradle
- Installing the RW 420 in the Cradle
- Removing the RW 420 from the Cradle
- RW 220 Vehicle Cradle
- Installing the RW 220 in the Cradle
- Removing the RW 220 from the Cradle
- Preventive Maintenance
- Extending Battery Life
- General Cleaning Instructions
- Troubleshooting
- LCD Control Panel Indicators
- Troubleshooting Topics
- Troubleshooting Techniques
- Printing a Configuration Label
- Performing a Forced Shutdown
- Communications Diagnostics
- Calling Technical Support
- Specifications
- Printing Specifications
- Memory/Communications Specifications
- RW 420 Media Specifications
- RW 220 Media Specifications
- Communications Ports
- USB
- RS232/USB
- Font/Bar Code Specifications
- Physical/Environmental/Electrical Specifications
- RW Series Accessories
- Appendix A
- Interface Cables
- RS232 Download Cable
- USB Download Cable
- USB Cable
- Appendix B
- Media Supplies
- Appendix C
- Maintenance Supplies
- Appendix D
- Product Support
- Appendix E
- Battery Disposal
- Product Disposal
- Appendix F
- Using zebra.com
- Index
- Patent Numbers
67
RW Series User Guide
Communications Ports
USB
Signal
Description
Pin# Name Type
1 VBUS USB Bus Power
2 USB - bi-directional I/Osignals
3 USB+ bi-directional I/Osignals
4 USB_ID IdentiesA/Bconnector
5 Return Ground
RS232/USB
Signal
Description
Pin# Name Type
1 USB D- bi-directional I/Osignals
2 USBD+ bi-directional I/Osignals
3 RXD input Receive Data
4 TXD output Transmit Data
5 DTR output Data Terminal Ready- set high when
printer is on.
6 GND Ground
7 DSR input Data Set Ready- low to high
8 RTS output Request To Send- set high when
printer is ready to accept a
command or data
9 CTS input Clear To Send from host
10 VBUS USB Bus Power
continued