User's Manual

51
RW Series User Guide
RW 220 Vehicle Cradle
The RW 220 can be used in conjunction with its own docking
Cradle. When the printer is “docked” it can be powered by ei-
ther its own battery or one of the RCLI series of external char-
gers. Refer to the documentation supplied with the Cradle for
more information.
Installing the RW 220 in the Cradle
Refer to Figure 23.
 Important•Itisrecommendedasasafetyprecautionthatthe
adjustableshoulderstrapberemovedpriortodockingthePrinter.This
precautionensuresthestrapwillnotinterferewithproperoperationof
thevehicle.
• Placethebottomoftheprinteroverthetwopinsinthe
Cradle.
• RockthetopofthePrinterintotheCradleandpressrm-
ly until it latches in place.
Figure 23: Installing the RW 220 in the Cradle
continued
Place the
Printer over the
retaining pins in
the Cradle.
Rock the Printer into
the Cradle to latch it in
position.