User's Manual

50
RW Series User Guide
 Ifthechargeindicatordoesnotlightup,unlatchtheprinterfromthe
VehicleCradle,liftitclearfromtheCradleandre-seatit.
 RefertotheVehicleCradleInstallationGuideformorecomplete
informationonthepowerandchargeindicators
Youcanloadmedia(includingmediafromanexternalsup-
ply) and perform cleaning operations normally when the
RW 420 Printer is installed in the Cradle .
Removing the RW 420 from the Cradle
Refer to Figure 22.
• TurnthePrinteroff.
• PushonthelatchontheCradleandrockthetopofthe
printer away from the Cradle.
• LiftthePrinteroutfromtheCradle.
Replace the Docking Connector Cover if you will be us-
ing the Printer for an extended period of time away from the
Cradle.
Figure 22: Removing the RW 420 from the Cradle
Lift the printer free of
the retaining pins.
Press the
Latch button
to release the
Printer.
Rotate the
Printer out of
the Cradle.