User's Manual

25
RW Series User Guide
Display Functions Not Accessible from the Keypad
1
Function Default setting Scroll & Select Options
WLAN ID
2
 FactorySet  N/A
Value
 Tear-off 00 • Increase(max.=+10)
 Position(TopofForm)  • Decrease(min.=-120
   • AllprotocolsOn
 Network&RFSettings  • ProtocolsOnorOff 
individually
 BridgeMode Off • Off
   • On
 DTR/VBUS-PowerOff Off • On
   • Off
 Present-at 000 • Increase(max.=+120)
   • Decrease(min.=000
Displays current
 Bluetoothparameters n/a  Bluetoothoperating 
parameters
Displays current
802.11b WLAN parameters n/a  802.11boperating
parameters
 MediaType Journal • Journal
   • Label
 SmartCardor  • Off
 MSRCard Off • Display“RDR”
Reader Status
3
 NOTES:
 1:Theparametersinthistablewillappearonthedisplaybutcan
besetonlybyusingaPCrunningZebra’sLabelVistalabelcreation
programandadatacablelinktotheprinter.
 2:CanbeadjustedfromthefactorydefaultusingaPCrunningZebra’s
LabelVistalabelcreationprogramandadatacablelinktotheprinter.
 3:Cardreaderstatusisunderapplicationcontrol,andisnotuser
selectable.