User's Manual

24
RW Series User Guide
the screen in a dark environment, or provides better contrast
in a very bright environment. Use of the display backlight will
decrease the time the printer will run between charges. Refer
to the section “Extending Battery Life” for more information.
Extended LCD Functions
1
Function Default setting Scroll & Select Options
 SensorType Bar • Bar
   • Gap
 BaudRate 19200 • 9600
   • 19200
   • 32400
   • 57600
   • 115200
 DataBits 8 • 7
   • 8
 Parity N(none) • E(Even)
   • N(None)
   • O(Odd)
 LCDContrast 8 • Increase(15max.)
   • Decrease(15max.)
 No-activityTimeout 120sec. • Decrease(0min.)
2
   • Increase(120max.)
   • Off
   • On(The4textlines 
of display will be
Flip Screen Off flipped 180 ° when the
printer is in the Cradle
Location of icons will
remain unchanged.
   • 1–Low
 AudioVolume 3 • 2–Medium
   • 3-High
 MediaType Journal • Label
   • Journal
LCD Backlight
3
 MomentaryOn • MomentaryOnw/
time delay
   • Off
 FactoryReset No • No
 (Resetsallto  • Yes
factory set values)
 NOTES:
 1:LCDmenuoptionsareunderspecicapplicationcontrol.Notall
optionsmaybeavailableInyourprinter’sapplication.
 2:ANo-activitytimeoutvalueof“0”meanstheprinterwillremainon
untilpoweredoffbytheoperator.
 3:LCDBacklightturnsonwhenanykeyotherthanFEEDispressed