User's Manual

46 QL 420 User’s Guide
Label Specifications
Label/Tag Width 2" to 4.1" (50.8 mm to 104.1 mm)
Max. Label/ 20" (508 mm) with standard memory
Tag Length
Inter-label Gap. .08" to .16" (.12" preferred)
2 mm to 4 mm (3 mm preferred)
Label Thickness .0025” to .0065” (.064 mm to .165 mm)
Tag Thickness .0060” (.152 mm) maximum
Label Roll Size:
Max. Diameter 2.625" (66.7 mm) O.D.
Inner Core .75" (19 mm) minimum; 1.38” (35.05 mm) minimum
Diameter for linerless media
Use Zebra-brand direct thermal media that is outside
wound. Media may be reflective (black mark) sensing
or transmissive (gap) sensing, die-cut, continuous,
fanfold or linerless.
For die-cut labels, use only full auto dies.
The reflective media black marks should extend past
the centerline of the roll.
Black Mark Dimensions:
Media Requirements Minimum mark width: 0.5” (12.7mm) perpendicular to
edge of media, centered within the width of the roll.
Mark length: 0.094” (2.4 mm) parallel to edge of
media
Font/Bar Code Specifications
Five resident scalable and rotatable fonts
available from 12-48 pt.
Fonts Available Downloadable pre-scaled fonts via Label Vista™
software
Optional international character sets
Codabar
UCC/EAN 128
Code 39
1D Bar Codes Available Code 93
EAN 8/JAN 8, 2 and 5 digit extensions
EAN 13/JAN 13, 2 and 5 digit extensions
lnterleaved 2 of 5
MSI/Plessey
FIM/POSTNET
UPC-A, 2 and 5 digit extensions
UPC E, 2 and 5 digit extensions
2D Bar Codes Available MaxiCode
PDF 417
Rotation Angles 0°, 90°, 180° , and 270°