User's Manual

34 QL 420 User’s Guide
Using the Accessories
Belt Clip
Refer to Figure 14. The QL 420
is equipped with a belt clip. To
use: hook the clip over your belt,
and ensure that the clip is se-
curely attached to the belt. The
belt clip will pivot to allow you to
move freely while wearing the
printer.
continued on next page
Kickstand
Refer to Figure 15 .
The Kickstand option
allows users to use
the printer on a desk-
top. To use the op-
tional Kickstand: Flip
the Kickstand on the
back of the printer
open until you feel a
slight detent. The QL
420 will now sit at ap-
proximately a 33º an-
gle on a desktop.
Clip printer to
belt
Printer can
pivot freely
FIGURE 14: THE QL 420 BELT CLIP
FIGURE 15: THE QL 420 KICKSTAND