User's Manual

QLn Series User Guide

WLAN Overview

QLn320 printers can be equipped with a radio using the in-

dustry standard 802.11 protocols. They will have the FCC ID

number on the serial number label on the back of the unit.

• QLn320 series Wireless Network Printers with the Zebra 802.11

WLAN radio module can be identified by the text “Wireless

Network Printer” on the serial number label on the back of the

printer.

• These printers allow wireless communication as a node within a

local area network (LAN) and its wireless capabilities allow com-

munications from any point within the LAN’s perimeter. Methods

of establishing communications to the printer will vary with

each LAN application.

General information on establishing WLAN communications can be

found in either the ”CPCL Programming Manual” or the “Quick Start

Guide for Mobile Wireless Printers” both available on-line. More in-

formation and LAN configuration utilities are included in Zebra’s Net

Bridge™ program (version 2.8 and later). Net Bridge may be down-

loaded from the Zebra Web site.

Setting Up the Software

QLn320 printers use Zebra’s CPCL and ZPL Programming languages

which were designed for mobile printing applications. CPCL and ZPL

are fully described in the ”CPCL Programming Manual” and the “ZPL

Programming Guide” available on-line at

www.zebra.com/manuals

You can also use Designer Pro, Zebra’s Windows

based label cre-

ation program which uses a graphical interface to create and edit la-

bels in the CPCL language.

Refer to Appendix F for tips on downloading the Designer Pro appli-

cation from Zebra’s Web site.