User Manual

O-15
Cameo 2/3 Series User Guide
Detail "A"- Top view of printer
Cameo 2 with MSR option
Magnetic Stripe Reader
The optional magnetic stripe reader (MSR) is used as fol-
lows:
1. A flashing status light indicates the printer is available to
scan. Place the card into the reader slot as shown. The
magnetic stripe must face the top of the printer, and into
the body of the printer as shown in Detail “A” below.
2. Slide the card through the slot. The card will be read
if slid in either direction. Depending on the application
software, the receiving terminal will sound a beep on a
successful scan.
3. If the card did not read, slide it back through the slot in
the opposite direction.
Flashing light means
O.K. to scan card