User's Manual

Using the MC65 2 - 17
Panel time-out settings. These settings are configurable and the factory default settings are shown in Table 2-5 are
subject to change/update.
Locking the ES400
You can lock the ES400 by disabling key presses and screen tap or by requiring a password or finger swipe. There
are two types of locking features available; the standard Microsoft lock and the Motorola lock. To select either the
Microsoft lock or the Motorola lock:
1. Tap > System > Lock Switch.
2. Tap the Select Lock soft key.
3. Select either Moto lock or Microsoft lock.
4. Tap .
Microsoft Locking
Locking the ES400 turns off keyboard and touch screen functionality. This is helpful when the ES400 is turned on
and you want to prevent accidental key presses.
To lock the device, tap > .
The lock screen appears.
Table 2-5 Wake-up Default Settings
Condition for Wake-up Power Button Automatic Time-out
AC power is applied. No Yes
Mobile computer is inserted into a cradle. No Yes
Mobile computer is removed from a cradle. No Yes
Mobile computer is connected to a USB device. No Yes
Mobile computer is disconnected from a USB device. No Yes
A key is pressed. No Yes
The scan triggered is pressed. No Yes
The screen is touched. No No
Bluetooth communication Yes Yes
Incoming phone call Yes Yes
Preliminary