User's Manual

1 - 14 MC65 User Guide
Handstrap Replacement
Removal
To remove a handstrap from the MC65:
1. Slide the handstrap clip out of the handstrap slot.
Figure 1-12 Handstrap Clip Removal
2. Remove the battery.
3. Using a small flat screwdriver, push the head of the screwdriver between the handstrap pin and the bottom of
the housing as shown below.
4. Pry the handstrap and pin up and out of the handstrap mount area.
CAUTION When removing handstrap pin, be carefully not to damage handstrap mounting area.
Preliminary