User's Manual

4 - 6 MC65 User Guide
• Headset Mode: Connect a Bluetooth headset or a wired headset to automatically switch audio to the
headset.
The MC65 defaults to handset mode. When a wired headset is plugged into the MC65 headset connector or a
Bluetooth headset is configured for use with the MC65, the earpiece and speakerphone are muted and audio is
heard through the headset.
Using a Wired Headset
You can use a stereo headset for audio communication when using an audio-enabled application. To use a
headset, plug the headset jack of the Headset Adapter Cable into the headset connector on the side of the MC65.
Plug the Headset connector into the connector on the Headset Adapter Cable. Set the MC65’s volume
appropriately before putting the headset on. Plugging a headset into the jack mutes the speaker.
Figure 4-6 Using a Headset
Using a Bluetooth Headset
You can use a Bluetooth headset for audio communication when using an audio-enabled application. See Chapter
7, Using Bluetooth for information on connecting a Bluetooth headset to the MC65. Set the MC65’s volume
appropriately before putting the headset on. When a Bluetooth headset is connected the speakerphone is muted.
It is recommended for phone conversations to use the Bluetooth Hands-free profile instead of the Headset profile.
See Chapter 7, Using Bluetooth for more information.
?????? Does the Bluetooth icon appear ???????
NOTE While using a Bluetooth headset during a call, the MC65 will not go into suspend mode.
NOTE Remove the headset jack plug before connecting the Headset Adapter to the MC65.
Headset Adapter
Cable
Breakaway
Connectors
Headset
Connector
Preliminary