User's Manual

Accessories 6 - 11
Cables
This section describes how to set up and use the cables. The cables are available with a variety of connection
capabilities.
The following communication/charge cables are available:
• USB Charging cable
• Provide the MC65 with operating and charging power when used with the Motorola approved power
supply.
• Synchronize information between the MC65 and a host computer. With customized or third party software,
it can also synchronize the MC65 with corporate databases.
• Charge Only cable
• Provide the MC65 with operating and charging power when used with the Motorola approved power
supply.
• Auto Charge cable.
• Provide the MC65 with operating and charging power when used with the Motorola approved power
supply.
Battery Charging and Operating Power
The communication/charge cables can charge the MC65 battery and supply operating power.
To charge the MC65 battery:
1. Connect the communication/charge cable power input connector to the Motorola approved power source.
2. Slide the bottom of the MC65 into the connector cup end of the communication/charge cable and gently press
in until it latches into the MC65.
3. Slide the two locking tabs up until they both lock into position.
Preliminary