User Manual

___________________________________________________________________________
WhereLAN III User’s Guide
___________________________________________________________________________ 98
User’s Guide, WhereLAN III draft D1675 rev F
© Copyright Zebra Technologies, 2012
Zebra Confidential
APPENDIX E: HYPERTERMINAL BOOT SEQUENCE
U-Boot 1.1.4 (May 6 2011 - 14:27:47) Micrel, WhereNet 1.2
DRAM: 32 MB
Flash: 8 MB
In: serial
Out: serial
Err: serial
Enter "CTRL-Z" to abort autoboot in 3 seconds
## Booting image at 02020000 ...
Image Name: Linux-2.6.9-KS8695
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1441116 Bytes = 1.4 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 021a0000 ...
Image Name: Ram disk
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 2124742 Bytes = 2 MB
Load Address: 00800000
Entry Point: 00800000
Verifying Checksum ... OK
Starting kernel ...
Uncompressing Linux...................................................................................... done, booting the kernel.
Linux version 2.6.9-KS8695 (gcc version 3.4.5)
WhereNet Generation III
CPU: ARM922Tid(wb) [41029220] revision 0 (ARMv4T)
CPU: D VIVT write-back cache
CPU: I cache: 8192 bytes, associativity 64, 32 byte lines, 4 sets
CPU: D cache: 8192 bytes, associativity 64, 32 byte lines, 4 sets
Machine: Micrel Centaur
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists
Kernel command line: console=ttyAM0,19200
PID hash table entries: 256 (order: 8, 4096 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 32MB = 32MB total
Memory: 27488KB available (2205K code, 513K data, 68K init)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok