User Manual

___________________________________________________________________________
WhereLAN III User’s Guide
___________________________________________________________________________ 83
User’s Guide, WhereLAN III draft D1675 rev F
© Copyright Zebra Technologies, 2012
Zebra Confidential
Procedure
Use the SETUP to select cable type, wire standard, category and wire size on
the Fluke CableMeter:
• Cable: UTR
• Wiring: 10BaseT 2PR
• Category: Cat5
• Wire Size: AWG24
Turn the Fluke CableMeter rotary switch to WIRE MAP. The correct readout
when testing 2 pair cable is shown in Figure 39 below. If a different readout
appears, the cable was not constructed properly and must be corrected.
Figure 39 Correct readout when testing 2 pair cable.
12 36 ID
12 36 #1