User Manual

___________________________________________________________________________
WhereLAN III User’s Guide
___________________________________________________________________________ 71
User’s Guide, WhereLAN III draft D1675 rev F
© Copyright Zebra Technologies, 2012
Zebra Confidential
8.1 Ethernet
The WhereLAN III utilizes standard 10/100 802.3 Ethernet connectivity via
cat 5 cables. The Location Sensor must be wired to a nearby hub, which is in
turn connected to the network containing the database CPU. The maximum
Ethernet cable run is 328 ft (100 m). If additional distance is required, hubs,
repeaters, and fiber (with 10/100BaseT converters) can be used to extend the
distance. Refer to IEEE guidelines for Ethernet cabling.
Do not exceed the maximum Ethernet cabling length of 328 ft (100 m).
8.2 Wi-Fi Antenna Kit
The LOS-5000-00AB WhereLAN-III with Wi-Fi has the option of adding on
an antenna cable and mounting bracket kit CBK-020-00. This kit is intended
to work with any of the three Wi-Fi antenna Accessories.
The kit consist of the mounting bracket, 4 screws, and the SMB to RP-TNC
cable.
Figure 24 CBK-020-00
____________
____________