User Manual

___________________________________________________________________________

WhereLAN III User’s Guide

___________________________________________________________________________ 69

User’s Guide, WhereLAN III draft D1675 rev F

Zebra Confidential

8 CABLING

The figure below, labels the appropriate connections which must be made to

the Location Sensor in normal operation. The connector types and

recommended cable types are detailed in Section 3.

Figure 22 Location Sensor Connections

For all Outdoor installations:

• Use part GS-888-00 grease (supplied with unit) in ALL Connecter

Jacks. Fill each of the following connections, with Nyogel Weather

Sealant, these include the Left and Right antenna, Timing connections,

Wi-Fi Client, Ethernet, Serial interface, and Power connection. This is

to help weather proof the connections from water and corrosion.

• Routing the cables through the Drip Plug, supplied with unit, plug

cables into units and fully (carefully) fully install Drip Plug into

connector well.

Figure 23 Drip Plug