User Manual

___________________________________________________________________________

WhereLAN III User’s Guide

___________________________________________________________________________ 51

User’s Guide, WhereLAN III draft D1675 rev F

Zebra Confidential

6.2 Mounting

The site design specifies the location of the Location Sensor(s) to provide

optimum system performance. It is critical that the Location Sensor is

mounted in a position which provides good RF visibility to the tracked assets.

Thus the Location Sensor must be mounted exactly in the position specified in

the site design document

The Location Sensor has two methods of mounting .The first can be hung

using nut pocket on top for attachment to accept a 3/8 in (10 mm) threaded

rod and jam nut, useful when using a beam clamp type of hanger. The second

method of mounting is a pole mount hardware kit is available separately, ZES

Part Number RM-510-00 Mounting Bracket, Pole Mount.

Figure 4 Mounting Points

Failure to mount the Location Sensor in the exact position specified in the

site design will result in erroneous or non-locates of the tracked assets.

____________

Note

Safet

Lan

ard Points

Nut Pocket

Mountin

Bracket Points