User Manual

___________________________________________________________________________

WhereLAN III User’s Guide

___________________________________________________________________________ 50

User’s Guide, WhereLAN III draft D1675 rev F

Zebra Confidential

Earth Ground Locations.

Bolt Size 8mm. Max

Length 25mm.

6 INSTALLATION AND MOUNTING

Read Installation and Instruction sheet included with the Location Sensor as

well as all Safety and Installation Warnings/Cautions before installing. Follow

the Site Design document for installed location.

6.1 Safety and Installation Warnings and Cautions

Warning - Warning - Electrical Shock: A protective earthing

conductor with green and yellow insulation, minimum of 18 AWG, shall be

installed to the protective earthing terminal of the metal enclosure when I/O or

power cables are routed outdoors. National electrical codes shall be followed

to install facility protective earthing conductor to the protective earthing

terminal.

Figure 3 Safety and

Warnings

Warning - Electrical Shock: No operator serviceable parts inside. Refer

servicing to qualified personnel. To prevent electrical shock, do not remove

covers.

Caution - The Location Sensor hardware must be installed by a qualified

service technician

Caution - Use of Zebra external power supply is limited to indoor use

and a max 40° C environment. Only use Zebra approved power supplies.

Caution - The Timing Sync cable use is limited to indoor only.