User Manual

___________________________________________________________________________
WhereLAN III User’s Guide
___________________________________________________________________________ 49
User’s Guide, WhereLAN III draft D1675 rev F
© Copyright Zebra Technologies, 2012
Zebra Confidential
• And now, the item that corresponds to, ‘WPA Supplicant’, respond
‘yes’ to enable wpa_supplicant operation.
• Press ESC to save changes, and enter the ff2 password, and space to
continue.
• The unit must be reset in order for wpa_supplicant processing to take
effect.
Verify the unit’s Wi-Fi network connection is operation.
• From the Main Menu select the number that corresponds
‘Diagnostics’.
• In the Diagnostics Menu, select the number that corresponds to
‘802.11 Client’.
• In the 802.11 Client Menu, select the item that corresponds to ‘WPA
Supplicant Status’ and WhereLAN III will display its Wi-Fi
association status, as shown below.
Important: It is good practice to verify the operation of the Wi-Fi before
having the unit installed.