User Manual

___________________________________________________________________________
WhereLAN III User’s Guide
___________________________________________________________________________ 39
User’s Guide, WhereLAN III draft D1675 rev F
© Copyright Zebra Technologies, 2012
Zebra Confidential
5.4 Wi-Fi Client Configuration (LOS-5000-00AB only)
The Wi-Fi client card embedded in the WhereLAN III must be configured
with the proper IP address or for DHCP set and the Interface must be ON. In
addition, the Wi-Fi network parameters, such as the SSID, and authentication
and encryption methods, must be configured in the wpa_supplicant, (See
sections 5.4.2 Configuring the Wi-Fi Network Parameters and 5.4.3
WPA_Supplicant Cautions)
From the Main Menu:
• Select Ethernet Settings.
• Under Ethernet Menu select 3 WLAN.
• Set 1. Interface to ON, then IP/DHCP settings.