User Manual

___________________________________________________________________________

WhereLAN III User’s Guide

___________________________________________________________________________ 38

User’s Guide, WhereLAN III draft D1675 rev F

Zebra Confidential

• Select 1 for setting Boot Method, Flash for internal image or Network

for image. (Flash is default and most commonly used).

• Select 2 for wired LAN Port IP setting or 3 WLAN client IP/DHCP

setting.

• Save the configuration changes by using ESC key entering the

password “ff2”.

• Note Changes take effect on unit reboot/reset.

• Confirm communication to the Location Sensor by “pinging” the

device from a DOS prompt.