User Manual

___________________________________________________________________________

WhereLAN III User’s Guide

___________________________________________________________________________ 37

User’s Guide, WhereLAN III draft D1675 rev F

Zebra Confidential

While there is no restriction to the IP address, it must match the address in the

Site file for that particular WhereLAN III. The IP address(es) can be static

assigned, or dynamically assigned via DHCP. If assigned through DHCP, the

DHCP server must contain the MAC address and corresponding IP address for

each of the Location Sensors (and Wi-Fi Client).

For networks utilizing DHCP, the IP address or host name of the site’s

RTLS server must be entered in the DHCP server. See the VSS User

Guide for more details on Network Autoconfig.

To configure the IP address of the Location Sensor:

Note the following configuration examples are done thru HyperTerminal.

• Connect to the Location Sensor using SSH, or HyperTerminal.

• Select the number that corresponds to ‘Ethernet Settings”1 and

confirm the unique MAC address for the Location Sensor.

____________

Note

____________