User Manual

___________________________________________________________________________

WhereLAN III User’s Guide

___________________________________________________________________________ 36

User’s Guide, WhereLAN III draft D1675 rev F

Zebra Confidential

Each WhereLAN III is shipped with a label set containing one label (Figure 2)

with the bar coded MAC address of the unit and its Wi-Fi client (as

applicable) and three labels with the last six characters of the Location

Sensor’s MAC address in large type. Ensure that the label is correct by

matching the MAC address(es) on the loose label set with the MAC

address(es) listed on the back of the unit. Place the loose bar code label in the

site design document where indicated, and place one or more of the large type,

six character labels on the exterior of the Location Sensor in positions that are

visible after installation.

The MAC address label must be clearly marked on the exterior of the

Location Sensor housing in a position visible after installation.

Figure 2 Example of LOS-5000-00AB Label

Last 6 LS

MAC digits

Wi-Fi Client

MAC Address

Location Sensor

MAC Address

Location Sensor

Serial Number

____________

Note

____________