User Manual

___________________________________________________________________________

WhereLAN III User’s Guide

___________________________________________________________________________ 25

User’s Guide, WhereLAN III draft D1675 rev F

Zebra Confidential

In order to have IPv6 network traffic (blinks, status information, etc.) between

the WhereLAN-III devices and the VSS server, the following requirements

must be fulfilled:

• The WhereLAN-III device must be able to acquire a global IPv6

address as described above.

• IPv6 must be enabled in the operating system (Windows) on the VSS

server.

• The following steps must be followed in System Builder, which is the

tool that generates the sitedata.dat configuration file parsed by the VSS

services and the WhereLAN-III devices:

• Activate IPv6 in the ‘Change Site Attributes’ dialog window and enter the

global IPv6 network prefix that the IPv6 router on that network is using: