User's Manual

___________________________________________________________________________
WhereLAN III User’s Guide
___________________________________________________________________________ 26
User’s Guide, WHERELAN III D1675 rev A
© Copyright ZES, 2010
Zebra Confidential
8.3 Location Sensor Operational Verification
Prior to optimizing locate performance, the operation of the Location Sensor
must be verified. The checklist below specifies the verification of the
configuration and basic operation.
Location Sensor
Outdoor
Omni
Antenna
P
ower/
H
ealth
Tag
Reception
Ethernet
WLAN
Figure 7 Location Sensor LED indicators
 Verify that each Location Sensor is operational by verifying that the
left Power/ Health LED is illuminated solid red.
 For wired 802.3 Location Sensors, verify that the Ethernet LED is
solid red when connected and blinking red when activity is present.
 Verify that the RX detects LED is blinking red indicating reception of
tag blinks.
 For wireless 802.11b Location Sensors, verify that the WLAN activity
LED is blinking red during power up state and solid red otherwise.