User's Manual

___________________________________________________________________________

WhereLAN III User’s Guide

___________________________________________________________________________ 23

User’s Guide, WHERELAN III D1675 rev A

Zebra Confidential

8 CABLING

Figure 5 below shows the connections which must be made to the Location

Sensor in normal operation. The connector types and recommended cable

types are detailed in Section 3.

Figure 5 Location Sensor connections

Note:

For all Outdoor installations, use ZES part GS-888-00 grease in

ALL Connecter Jacks.

Fill each of the following connections, with grease,

these include the Left and Right antenna, Timing connections, Wifi Client,

Ethernet, Serial interface, and Power connection.

This is to help weather proof

the connections from water and corrosion. Routing the cables through the

Rubber Grommet, supplied with unit, is also necessary for Outdoor

installations.