User's Manual

___________________________________________________________________________

WhereLAN III User’s Guide

___________________________________________________________________________ 17

User’s Guide, WHERELAN III D1675 rev A

Zebra Confidential

6 MOUNTING OVERVIEW

The site design specifies the location of the Location Sensor(s) to provide

optimum system performance. It is critical that the Location Sensor is

mounted in a position which provides good RF visibility to the tracked assets.

Thus the Location Sensor must be mounted exactly in the position specified in

the site design document.

Failure to mount the Location Sensor in the exact position specified in the

site design will result in erroneous or non-locates of the tracked assets.

The Location Sensor can be hung using nut pocket on top for attachment to

accept a 3/8 in (10 mm) threaded rod and jam nut, useful when using a beam

clamp type of hanger. A pole mount hardware kit is available separately, ZES

Part Number RM-TBB Mounting Bracket, Pole Mount.

____________

For safety it is strongly recommend that a Safety Lanyard be employed with

either mounting method.

____________

Note

____________