User's Manual

___________________________________________________________________________

WhereLAN III User’s Guide

___________________________________________________________________________ 14

User’s Guide, WHERELAN III D1675 rev A

Zebra Confidential

must match the address in the Site file for that particular Location Sensor.

The IP address(es) can be static assigned, or dynamically assigned via DHCP.

If assigned through DHCP, the DHCP server must contain the MAC address

and corresponding IP address for each of the Location Sensors (and WLAN

Client).

For networks utilizing DHCP, the MAC addresses of the Location Sensor

and Wifi Client (LOS-5000-00AB only) must be entered in the DHCP

server.

To configure the IP address of the Location Sensor:

Note the following configuration examples are done thru HyperTerminal.

• Connect to the Location Sensor using Telnet (preferred), or

HyperTerminal.

• Select 1 and confirm the unique MAC address for the Location Sensor.

____________

Note

____________