User's Manual

___________________________________________________________________________

WhereLAN III User’s Guide

___________________________________________________________________________ 10

User’s Guide, WHERELAN III D1675 rev A

Zebra Confidential

• Power Over Ethernet injector

TBD

• Power Supply

• Power Supply (Extended Temp)

PS-040-00

TBD

• Pole Mount Kit:

TBD

5 CONFIGURATION & CONTROL

5.1 Location Sensor Self Boot

Upon power up, the Location Sensor executes a self boot process. The boot

process takes between 45 to 60 seconds. If a fault occurs during the boot

process, the unit may reset and restart the boot process. During that process,

the four LEDs blink in a sequence to indicate the current stage of the power

up boot process. Once the boot process is complete, the LEDs revert to their

standard functions indicating power/health, tag status, Ethernet, and WLAN.

5.2 Location Sensor Interface

After the Location Sensor has completed its boot process, it is possible to

communicate with the unit via the following methods.