Quick Start Guide

Install the Battery

1. Remove the battery from the packaging.

2. Locate the Battery Contacts.

3. Insert the battery into the battery compartment

with the Battery Contacts facing down.

4. Press the top of battery into place.

5. Slide the Battery Lock Latch up to secure the

battery.

6. Replace the battery cover - the LEX 700 starts.

NOTE: The LEX 700 will not charge until the

battery cover is locked in place.

Remove the Battery

To remove the battery:

1. Remove the Battery Cover (see page 5).

2. Slide the Battery Lock Latch down to unlock the

battery.

3. With the tip of your finger, lift up the battery from

the side closest to the lower side of the LEX

700.

Battery Contacts Side

Battery Lock Latch

Lock

Unlock

700 Quick Start Guide.fm Page 7 Thursday, May 31, 2012 1:20 PM