User Manual

___________________________________________________________________________
Infrastructure Installation Guide
___________________________________________________________________________ 16
Location Sensor Installation Guide D0405 rev PA6
 Copyright WhereNet, Corp. 2001
WhereNet Confidential
The Location Sensors can be configured using either an automatic process or a
manual process:
Automatic Configuration
TBD
Manual Configuration
• Connect to the Location Sensor using LP Manager, Telnet or
Hyperterminal.
• Confirm the unique MAC address for the Location Sensor.
• Select Set IP Address from the menu and set the IP address.
• Access the Access Point configuration by typing ctrl-w.
• Follow the menu prompts and set the IP address.
• Confirm communication to the Location Sensor by “pinging” the device(s)
using LP Manager.
The MAC address label must be clearly marked on the exterior of the
Location Sensor housing in a position visible after installation.
____________
______________