User Manual

___________________________________________________________________________
Infrastructure Installation Guide
___________________________________________________________________________ 15
Location Sensor Installation Guide D0405 rev PA6
 Copyright WhereNet, Corp. 2001
WhereNet Confidential
document where indicated, and place one or more of the large type, six character
labels on the exterior of the Location Sensor in positions that are visible after
installation.
Figure 9 LAP-4200 Label
Like other network equipment, the Location Sensor IP address(es) must be set to a
predetermined address. While there is no restriction to the IP address, it must
match the address in the Site file for that particular Location Sensor. The IP
address(es) can be static assigned, or dynamically assigned via DHCP. If assigned
though DHCP, the DHCP server must contain the MAC address and
corresponding IP address for each of the Location Sensors (and Access Points).
Last 6 LS
MAC digits
Access
Point
MAC Address
Label applied
to unit from
factory
Location Sensor
MAC Address
Location Sensor
Serial Number